Found website easy to use and manual very clear. First class service
Text excerpt from page 12 (click to view)
3. PCB-JOG
1. Remove the Top Cover. (Refer to Para. 1 of the DISASSEMBLY.) 2. Remove the Front Panel. (Refer to Para. 2 of the DISASSEMBLY.) 3. Unfasten the three screws (a) shown in Fig. 9 and remove the PCB-JOG.
Front Panel
PCB-JOG
a
Fig. 9
4. PCB-SIGNAL
1. Remove the Top Cover. (Refer to Para. 1 of the DISASSEMBLY.) 2. Lift and remove the Cover D VHS as shown in Fig.10. 3. Remove the one screw (a) and remove the PCB HOLDER shown in fig. 10. 4. Disconnect the Connector FX on PCB-D-IF. 5. Disconnect the Connector HK on PCB-HEAD AMP. 6. Lift and remove the PCB-SIGNAL as shown in Fig. 10.
Cover D VHS a PCB HOLDER PCB-SIGNAL PCB-D-IF
Fig. 10
5. PCB-D-IF
1. Remove the Top Cover. (Refer to Para. 1 of the DISASSEMBLY.) 2. Lift and remove the Cover D VHS as shown in Fig.10. 3. Remove the one screw (a) and remove the PCB HOLDER shown in fig. 10. 4. Remove the Connector FX. 5. Lift and remove the PCB-D-IF as shown in Fig. 10.
