|
Categories
|
Information
|
Featured Product
|
|
|
 |
|
There are currently no product reviews.
 ;
First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
 ;
Good service manual. I gat all I want. Copy is good, but could be better. All clear and useful. I sincerely recommend.
 ;
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
 ;
Welcome. The scheme is clearly helped me to repair. Worth to download it.
 ;
Excellent manual, very clear, technical specification provided, useful information regarding adjustment and set up.
PRACTICAL SERVICE FIGURE
<TUNER SECTION>
<FM SECTION> Sensitivity : (IHF, THD 3%)
<TAPE SECTION>
Tape speed : Wow & flutter : Take-up torque : F.F torque : Rew torque : Back tension : S/N ratio : Distortion : Noise level : Erasing Ratio: Frequency response : 3015Hz ± 50Hz Less than 0.52% (RMS) 20 ~ 30g-cm (FWD, REV) 70 ~ 150g-cm 70 ~ 150g-cm 1.0 ~ 3.0g-cm (FWD, REV) More than 43dB (PB, DC) More than 20dB (REC/PB, DC) Less than 2.5% (PB, DC) Less than 10.0% (REC/PB, DC) Less than 3.5mV (PB, DC, MAX.) Less than 0.3mV (PB, DC, MIN.) More than 45dB 63Hz +0/�8dB ~ 8kHz ± 4dB (NORMAL, PB) 63Hz +0/�8dB ~ 10kHz ± 4dB (CRO2, PB) 125Hz +1/�7dB ~ 8kHz �1/�13dB (REC/PB) TTA�100 TTA�210 TTA�320(NORMAL) TTA�310(CRO2)
Less than 17dB [at 76.0 / 90.0MHz] Less than 18dB [at 108.0MHz] Distortion : Less than 2% (at input 54dB) Less than 3% (at input 110dB) [at 90.0MHz] Stereo separation : More than 16dB [at 90.0MHz] Auto stop level : 12dB ± 5dB [at 90.0MHz] Intermediate frequency : 10.7 MHz ± 0.1MHz <AM SECTION> Sensitivity : (S/N 10dB)
Less than 58dB [at 630kHz] Less than 56dB [at 999 / 1440kHz] S/N ratio : More than 26dB (Input 74dB) [at 630kHz] More than 25dB [at 999 / 1440kHz] Distortion : Less than 5% (at input 74dB) Less than 10% (at input 120dB) [at 999kHz] Auto stop level : 60dB ± 10dB [at 999kHz] Intermediate frequency : 450kHz ± 3kHz
Test tape :
22
|
|
 |
> |
|