The service manual is really great - thanks to it I was able to install the laser unit and thus "save" my CD-player, which seemed to be impossible before I had the manual.
Complete service manual in very good scanning quality with all schematic and PWB graphics as well as assembly & maintenance instructions. A slight drawback is that the rastering of the PWB graphics sometimes makes it a bit difficult to follow fine traces, but no showstopper.
Text excerpt from page 3 (click to view)
� REASSEMBLY OF THE CASSETTE LID SPRING (T-SPRING)
B
1. Insert A into the hole on the cassette foot. 2. Fix B onto the Frame center indicated by arrow.
Cassette lid Frame center A
3. Fix C as shown in the diagram. 4. Lastly, fix in the boss D onto the Frame center.
C
D
Ensure this end is inserted inside the slot of the frame center.
Wires pop up
�� CAUTION POINTS DURING REASSEMBLY CASSETTE LID
1. Reassemble the cassette lid confirming that the flat wires to the FRONT C.B. do not obstruct cassette insertion.
Wires lay flat
Slots
MAIN C.B.
1. Ensure the MAIN C.B sits into the 2 slots and held by the hook.
2. Be sure that the AM BAR ANT wires do not obstruct the 2 switches. These wires should not be seen after the reassembly of the Rear Cabinet.