JBL HT1F
Owner's Manual

Troubleshooting
If the sound seems to come from instead of between the speakers, check the following: � Make sure the polarity (+ and �) of the speaker inputs are connected properly. � The speakers are too far from the back or side walls or are too far apart. Experiment with the speaker placement. If there is very low or no output from any of the speakers, check the following: � Receiver or processor/ amplifier is on and a source is playing. � Review proper operation of your receiver/processor. If there is very low or no output from one or more speakers, check the following: � Check the �Balance� control on your receiver/processor. � Check the surround level on your receiver/processor. � Check all wires and connections between the receiver/ amplifier and the speakers. Make sure all wires are connected and that none of the speaker wires are frayed, cut, or punctured. � Review proper operation of your receiver/processor. If the system plays at low volumes but shuts off as volume is increased, check the following: � Check all wires and connections between receiver/ amplifier and the speakers. Make sure all wires are connected and that none of the speaker wires are frayed, cut, or punctured. � If more than one pair of speakers is being used, check the minimum impedance requirements of your receiver/ amplifier.