|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Straightforward ordering process. Service manual scan was clear & easy to read. Very comprehensive instructions for alignment. Excellent, thank you.
 ;
Fast, clear and useful. Important for me: the manual is in German.
;
Very good quality. Some parts are not fully readable, but the fundamental ones are fine.
;
very good quality readable manual,printed off very well.
;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
When a disc cannot be ejected by method 1, follow the procedure below and remove the Chassis Cover.
< Method 3 >
1. Remove the Top Cover, the Bottom Cover, the Front Assembly, the Reinforce Plate and the Front Bracket. 2. To remove the Chassis Cover, remove 4 Screws A as shown in Fig. D6. 3. Remove a disc.
Screws A Screws A
Chassis Cover
Disc
Fig. D6
Reassembly note of the Chassis Cover: 1. Insert the pin A on the Chassis Cover into the hole A on the Main Chassis as shown in Fig. D7.
Chassis Cover
Pin A
Hole A
Main Chassis
Fig. D7
2. Tighten 4 Screws A as shown in Fig. D6.
1-5-6
E61TADC
|
|
|
> |
|
