PHILIPS HTS3010/94
Owner's Manual

Setup Menu Options (continued)
English

Audio Setup Page (underlined options are the factory default settings)
Speakers Volume Access the speaker�s level setup menu. Use keys to adjust the volume level for each connected speaker between -6dB to +6dB. See �Getting Started - Setting the speakers� channels�. Access the speaker�s distance setup menu. Use keys to set the delay times for the centre and rear speakers based on the listening position and distance. See �Getting Started - Setting the speakers� channels�.
Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot change in distance. Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

Speakers Delay

CD Upsampling

This feature enables you to convert the music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. { Off } � Turn off CD-upsampling. { 88.2 kHz (X2) } � To convert the sampling rate of the CDs twice as high as the original rate.
Notes: � If you have activated the CD upsampling feature, the audio output automatically switches to stereo mode. � If you press the SURROUND button on the remote control to select multi-channel mode, it turns off the CD upsampling feature.

Audio Sync

This feature allows you to adjust the audio delay times if the video playback is slower than the audio output streams. Use keys to set the delay times for the audio output between 0~200ms.

34