|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Came in the mail within a few hours. Gave clear instruktion on maintaines. Is of great use to have this manual in house
 ;
Easy to access. Clear instructions. No problems. Printed fine.
;
Great scan but please note that it is entirely in GERMAN.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
Getting Started (continued)
Selecting the matching colour system The colour system of the DVD system, DVD and TV should match. Only then will it be possible to play a DVD on this system. Before changing the TV system, determine the colour system of your TV. Setting the TV Display Set the aspect ratio of the DVD system according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.
1 In disc mode, press SETUP. 2 Press 2 repeatedly to select { Video Setup
Page }.
1 In disc mode, press SETUP. 2 Press 2 repeatedly to select { Video Setup
Page }.
3 Use 34 keys to highlight { TV Type },
then press 2.
3 Use 34 keys to highlight { TV Display },
then press 2.
Video Setup Page TV Type TV Display Progressive Picture Setting PAL NTSC Multi
Video Setup Page TV Type TV Display Progressive Picture Setting 4:3 Pan Scan 4:3 Letter Box 16:9 Wide Screen
4 Use 34 keys to highlight one of the
options below: { PAL }
Select this if the connected TV has the PAL colour system. It will change the video signal of an NTSC disc and output it to PAL format.
4 Use 34 keys to highlight one of the
options below: { 4:3 Pan Scan }
Select this if you have a conventional TV and want both sides of the picture to be trimmed or formatted to fit your TV screen.
{ NTSC }
Select this if the connected TV has the NTSC colour system. It will change the video signal of a PAL disc and output it to NTSC format.
{ 4:3 Letter Box }
Select this if you have a conventional TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed.
{ Multi }
Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.
{ 16:9 Wide Screen }
Select this if you have a widescreen TV.
5 Select a setting and press OK.
� Follow the instructions shown on the TV to confirm the selection (if any). � If a blank/distorted TV screen appears, wait for 15 seconds for auto recovery.
5 Select a setting and press OK.
TIPS:
The underlined option is the factory default setting. To return to the previous menu, press 1. To remove the menu, press SETUP.
19
001-049-hts3500s-75-Eng3 19 16/5/05, 2:32 PM
|
|
|
> |
|
