|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
fast response great copy easy to download quick to correct mistakes
;
This manual provided the necessary information to properly use the C-3 deck. The manual was an excellent reproduction and very clear.
;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
Advanced Setup�Continued
Speaker Levels
These settings are set automatically by the Automatic Speaker Setup function (see page 37). You can set the volume level of each speaker so that all speakers can be heard equally at the listening position.
6
SETUP
Press the [SETUP] button. Setup closes. Don�t forget to turn down the volume if you turned it up while setting the levels.
Notes: � A quick way to adjust the speaker levels is to press the remote controller�s [TEST TONE] button to turn on the test tone, use the [LEVEL�] and [LEVEL+] buttons to adjust the levels, and use the [CH SEL] button to select the speakers. � The speaker levels cannot be adjusted while a pair of headphones is connected, or the AV receiver is muted.
1
RECEIVER
Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button.
SETUP
2
Use the Up and Down [ ]/[ ] buttons to select �Level Cal,� and then press [ENTER]. A pink noise test tone is output by the front left speaker.
3
Turn up the volume so that you can hear the test tone suf�ciently. As each speaker outputs the test tone, its name appears on the display.
4
Use the Left and Right [ ]/[ ] buttons to adjust the speaker level, and use the Down [ ] button to select the next speaker. The levels can be adjusted from �12 to +12 dB in 1 dB steps (�15 to +12 dB for the subwoofer).
5
Repeat step 4 so that the level of the test tone coming from each speaker is the same. Speakers that you set to No or None in the Speaker Con�guration (page 57) do not output the test tone.
60
|
|
|
> |
|
