|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
More than pleased with my prurchase, very good product for the price.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
HTV-A1
Diagnosis Method for the AFPS Assy
(1) Remove the three screws A fixing the Heat sink. (2) Remove the three PCB Holders and then remove the Heat sink. (Refer to Fig.1) (3) Remove the screw B, remove the two screws C, remove the two push rivets D, and then remove the AFPS assy. (Refer to Fig. 3) (4) Short-circuit KN101 of the AFPS assy and KN1001 of the JACK assy. (5) Short-circuit all test terminals of the AFPS assy (SPRY, ACRY, PWON) to GNDD. (6) Remove C6031, enter an audio signal to the AL4 (Lch in) terminal, and analyze the AFPS assy. (Refer to Fig. 4)
Push Rivet D Screw C
JACK Assy
Screw B
Push Rivet D
AFPS Assy
Fig. 3
KN1001 Short-circuit SPRY, ACRY and PWON terminals to GNDD. Remove C6031 JACK Assy
Enter an audio signal
A
AFPS ASSY
SIDE A
Fig. 4
AFPS Assy
KN101
25
|
|
|
> |
|
