This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Text excerpt from page 84 (click to view)
SET UP menu
You can choose a signal source to be output from the EXT-2 terminal. You can do this with the output signals of the devices connected to other EXT terminals, or with the picture and sound from a TV channel you are currently viewing. 1 Press the 5 buttons to choose the arrow from the menu
> EXT SETTING EXT-1 EXT-3 EXT-5 TV EXT-4 DUBBING EXT-2
DUBBING
TV: The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal. � During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. � When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal. � The RGB signals from the TV games cannot be output. Teletext programmes cannot be output.
OK
D0022-EN
2 Press the 6 buttons to choose an EXT terminal or TV. Then press the a button The arrow in the menu represents a signal flow. The left side of the arrow shows a signal source output from the EXT-2 terminal. EXT-1/EXT-3/EXT-5: The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal.