This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
Text excerpt from page 31 (click to view)
Using the TV�s menu ID 1 Press the 6 buttons to choose a TV channel. 2 Press the red button to start the ID function. 3 Enter a channel name (ID). Press the 6 buttons to choose a character. Press the 5buttons to move the cursor. To cancel the MANUAL function: Press the DISPLAY button. 3 Press the 3 button to choose the system (sound system) for a TV channel you want to register. � For the sound systems in each country or region, see the table �BROADCASTING SYSTEMS� on page 12. 4 Press the green or red button to search for a TV channel. Scanning stops when the TV finds a TV channel. Then the TV channel is displayed. 5 Press the green or red button repeatedly until the TV channel you want appears. If the TV channel reception is poor: Press the blue or yellow button to finetune the TV channel. If you cannot hear the normal sound even when the picture of the TV channel appears normally: The SYSTEM setting is wrong. Press the 3 button and choose a SYSTEM that has normal sound. 6 Press the MENU/OK button and register the TV channel to a programme number. The normal EDIT menu is resumed.
To cancel the ID function: Press the DISPLAY button. 4 Press the MENU/OK button to register a channel name to a TV channel. DELETE 1 Press the 6 buttons to choose a TV channel. 2 Press the yellow button to delete the TV channel. The TV channel is deleted from the programme numbers list. MANUAL 1 Press the 6 buttons to choose a programme number to which you want to register a new TV channel. 2 Press the blue button to activate the MANUAL function. At the right side following the CH/CC number, the SYSTEM (sound system) of the TV channel appears.
