|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
 ;
Mi spiace per non poter scrivere in inglese... ma sono veramente soddisfatto del servizio offerto. Grazie..!!
;
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
;
Quick site processing. A complete and very useful manual with all details. Thank you!
;
Das Service Manual war von der ersten bis zur letzten Seite sehr informativ und hilfreich. Die Darstellung aller Teile war klar und der Text gut lesbar.
Vielen Dank, das war nicht der letzte Download bei ownner-manuals.com.
ICD-P27 SECTION 4 TEST MODE
[Setting Method of the Test Mode] (1) To enter the test mode, turn on the HOLD switch while pressing the STOP key and MENU key at the same time with the power on. [Exiting Method of the Test Mode] Exit the test mode by turning off the power. [Initial Status of the Test Mode] When the test mode is set, the LCD display appears as shown below. LCD display [Operation in the Test Mode] After entering the test mode, you can move within the test menu by pressing the . / > key. You can move to the submenu by pressing the x�B key. Then each test mode can be executed. 1. LCD test � LCD is tested all light-on and all light-off.
. / > (SELECT) x�B
ALL
x � B (SET)
LCD
STOP
LCD
OFF LCD CHK LCD ALL LCD
� � � � � �
LCD ON
LCD OFF
START
CHK
. /.
CHK
/091
P17
091t IC702 version (Displayed to A or B folder when version a or b.) P17t Set code
STOP STOP
END
STOP
[Flow Chart of the Test Mode]
START TEST MODE
2. Audio test Perform the through-playback. � Contents of the submenu DSPLOP: DSP through mode. � Select the microphone sensitivity with the MIC SENS switch. HtLtHtLt�� � MUTE can be set to �ON� or �OFF� with the ERASE key. � The sound volume can be adjusted with the VOL volume key during the audio test except the MUTE mode. � This test operates in accordance with to the JACK detection test. It displays the current mode, microphone sensitivity and mute on the LCD display. [Example of LCD display] DSP through mode/MIC: H/MUTE: OFFtH/OF/DSPLOP
. / > (SELECT) x � B (SET)
.
>
Initial status of Test mode. Set code,LPEC ST, F/W version display
>
.
LCD . > >
MENU
RST
.
KEY
AUDIO . > >
COUNT .
x�B
SLEEP . > >
USB .
AUDIO
STOP
DSPLOP H OF
BEEP . > > RTC KEY > >
LED .
DSPLOP
STOP
.
.
BATT
Turning off the power. END TEST MODE
8
|
|
|
> |
|
