|
There are currently no product reviews.
 ;
Very good manual for Technics SL 303. Manuale molto utile.
;
About one hour after checkout, the manual was available for download. Clear reading and detailed. Thanks
;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
SECTION 3 DISASSEMBLY
r
The equipment can be removed using the following procedure. Lid ASSY, Upper Digital board Jack board Unit, Switch Main board
Set
Note : Follow the disassembly procedure in the numerical order given.
3-1. LID ASSY, UPPER
Lid ASSY, Upper
4 1 Screw (B1.7X10)
Case ASSY
3 Remover solder 2 Screws (B1.7X9) Note : Not using a screw (10mm) of step
1 for this place.
3-2. DIGITAL BOARD
Digital board
2 1 Remove the connector (CN703)
Case ASSY
�5�
|
