|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Print was clear and easy to read. Thank you Joe joeoldaudio
;
Very great deal. In a few minutes a have the manual, that I needed. Thanl you very much
;
Manual was complete. Received it quickly. No problems
;
Product was very good. Received quickly and complete
 ;
The Sony AV-3600 service manual was what I needed for the repair of this unit
Thanks for the good service
Dave
ICF-CD555TV
5-7-3. Y GAIN (LUMINANCE SIGNAL CONTRAST LEVEL) ADJUSTMENT Adjusting Procedure: 1. Connect an oscilloscope to the TP1959 on the TV board. 2. Adjust the . / > keys so that the D level of the waveform on the oscilloscope is 3.25 ± 0.1 Vp-p.
5-7-7. B-SUB BRT (B-CH SUB BRIGHT) ADJUSTMENT Adjusting Procedure: 1. Connect an oscilloscope of 1 step voltage to the TP1960 on the TV board. 2. Adjust the . / > keys so that the G level of the waveform on the oscilloscope is 1.0 ± 0.1 Vp-p.
D G
0V
0V
5-7-4. BLACK LIMIT (BLACK LIMITER LEVEL) ADJUSTMENT Adjusting Procedure: 1. Connect an oscilloscope to the TP1959 on the TV board. 2. Adjust the . / > keys so that the E level of the waveform on the oscilloscope is 1.0 ± 0.1 Vp-p.
5-7-8. R-SUB CONT (R-CH SUB CONTRAST) ADJUSTMENT Adjusting Procedure: 1. Connect an oscilloscope of 10 step voltage to the TP1958 on the TV board. 2. Adjust the . / > keys so that the D level of the waveform on the oscilloscope is 3.25 ± 0.1 Vp-p.
D D
0V
0V
5-7-5. WHITE LIMIT (WHITE LIMITER LEVEL) ADJUSTMENT Adjusting Procedure: 1. Connect an oscilloscope to the TP1959 on the TV board. 2. Adjust the . / > keys so that the F level of the waveform on the oscilloscope is 3.9 ± 0.05 Vp-p.
5-7-9. B-SUB CONT (B-CH SUB CONTRAST) ADJUSTMENT Adjusting Procedure: 1. Connect an oscilloscope of 10 step voltage to the TP1960 on the TV board. 2. Adjust the . / > keys so that the D level of the waveform on the oscilloscope is 3.25 ± 0.1 Vp-p.
F D
0V
5-7-6. R-SUB BRT (R-CH SUB BRIGHT) ADJUSTMENT Adjusting Procedure: 1. Connect an oscilloscope of 1 step voltage to the TP1958 on the TV board. 2. Adjust the . / > keys so that the G level of the waveform on the oscilloscope is 1.0 ± 0.1 Vp-p.
0V
G
0V
18
|
|
|
> |
|
