|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good conversation, Pretty fast Service, wood do it again,
Have paid by Paypal, so i got the Service Manual online after 15 Min.
Very helpfully.
Greeting from Germany,
Hans
;
Good-quality scans. Detailed description. I hope I can repair the machine.
;
High-quality scanning. Detailed description. Recommend for all technician. A+++
;
This is a good quality scan of the original Service Manual from Nordmende, Germany. Contains the circuit diagram, PCB layout, adjust/tune instructions as well. It is NOT in English but in GERMAN language! That was quite right for my german friend from the lower east side in Berlin.
 ;
Received via e-mail this PDF manual is worth the money. This is a quality scan of a manual in excellent condition and is just as good as having the original manual in hand. I have later seen the original manual and it was printed in colour, but this particular manual is black & white but scan resolution is high end quality! All drawings and pictures are presented in great detail. So, nearly perfect score in my opinion.
If you own the turntable you also should own the manual!
SECTION 3 ELECTRICAL ADJUSTMENTS
0dB=1 µV [FM/TV Section] Setting: BAND switch: FM1 or TV
FM RF SSG 0.01µF set level meter + �
FM FREQUENCY COVERAGE ADJUSTMENT L8 Confirm Adjust for a reading on digital voltmeter. 87.5 MHz (TV 2 ch) 2.3 ± 0.1 V (1.0 ± 0.1 V) 108.0 MHz 8.5 ± 0.5 V (12.5 ± 0.5 V)
Note: Not use the FM RF signal generator in this adjustment.
(
): ICF-S79V
FM TRACKING ADJUSTMENT Adjust for a maximum reading on level meter. L6 CT4 87.5 MHz (TV 2 ch (59.75 MHz)) 108.0 MHz
± 22.5 kHz frequency speaker terminal deviation by 400 Hz FM lead wire antenna terminal signal Output level: as low as possible
( ICF-S79L only
): ICF-S79V
[AM (LW/MW) Section] Setting: BAND switch: AM (MW) or LW
Put the lead-wire antenna close to AM RF SSG the set. set 30% amplitude modulation by speaker terminal 400 Hz signal Output level: as low as possible
digital voltmeter MAIN board TP (VT) + �
LW FREQUENCY COVERAGE ADJUSTMENT Adjust for a reading on digital voltmeter. CT5 153 kHz 2.3 ± 0.1 V
level meter + �
Confirm
279 kHz
8.5 ± 0.5 V
Note: Not use the AM RF signal generator in this adjustment.
ICF-S79L only
LW TRACKING ADJUSTMENT Adjust for a maximum reading on level meter. L5 (LW side) 162 kHz CT2 243 kHz
AM (MW) FREQUENCY COVERAGE ADJUSTMENT Adjust for a reading on digital voltmeter. L9 531 kHz (530 kHz) 2.8 ± 0.1 V
Repeat the procedures in each adjustment several times, and the frequency coverage and tracking adjustments should be finally done by the trimmer capacitors.
Confirm 1,602 kHz (1,710 kHz) 9.5 ± 0.5 V Note: Not use the AM RF signal generator in this adjustment.
(
): ICF-S79V
ICF-S79V only
TV FREQUENCY COVERAGE ADJUSTMENT Adjust for a reading on digital voltmeter. L2 Confirm WEATHER 2 ch TV 13 ch 1.0 ± 0.1 V 10 ± 0.5 V
AM (MW) TRACKING ADJUSTMENT Adjust for a maximum reading on level meter. L5 <MW side> CT3 621 kHz (590 kHz) 1,395 kHz (1,490 kHz)
< (
AM IF ADJUSTMENT
>: ICF-S79L ): ICF-S79V
Note: Not use the FM RF signal generator in this adjustment.
ICF-S79V only
TV TRACKING ADJUSTMENT Adjust for a maximum reading on level meter. L1 CT1 WEATHER 2 ch (162.40 MHz) TV 13 ch (215.75 MHz)
Adjust for a maximum reading on level meter. T2 455 kHz
ICF-S79V only
TV IF ADJUSTMENT Adjust for a maximum reading on level meter. T1 10.7 MHz
�5�
 $4.99 ICFS79V SONY
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|
