ICOM IFR4000
Owner's Manual

2

INSTALLATION AND CONNECTIONS

� Top side installation q Remove the 1 screw (M4 � 8) from both side of the MB-78.

t Remove the 2 screws (M4 � 8) from both side of the side panel (front-end).

w Remove the handles from bottom bar. And turn the handles upside down, then replace the handles right side and left side.

y Attach the MB-78 to the top side of the repeater. Then tighten the 1 supplied screws (M4 � 8) and 2 removed screws to each side. (6 screws at total)

e Attach the handles to the bar, then tighten the screws. u The top side installation should look like below.

r The completed MB-78 should look like below.

i Turn the repeater upside down, then removing the 4 legs for mounting the 19 inch rack.

9