CHAPTER 14 TROUBLESHOOTING
<DISPLAY>
Level 1 FEEDSIZE Description Displays the size of original detected by the feeder. e.g., A4, LTR.
FEEDER
REf.
<ADJUST>
Level 3 DOC-ST DOC-ST-R Description Adjusts the original stop position for top separation. Same as DOC-ST-R. After selecting the item, place a single original on the RDF original tray, and press the OK key. When the original has been fed, open the feeder, and take note of the original on the copyboard glass. If the original is to the left of the V marking, increase the setting. If the original is to the right of the V marking, decrease the setting. Selects sheet-to-sheet distance for top pick-up. 1) Check to make sure that '0' is set to COPIER>OPTION>FACE-DOWN. 2) Select the item, and place two originals on the original tray. 3) Press the OK key. The original will be fed and will be stopped on the copyboard glass. 4) Adjust the distance between sheets. If the distance is small, increase the setting. If the distance is large, increase the setting. Adjusts the sheet-to-sheet distance for bottom pick-up. 1) Check to make sure that '1' is set to COPIER>OPTION>FACE-DOWN. 2) Select the item, and place two originals on the original tray. 3) Press the OK key. The original will be fed and stopped on the copyboard glass. 4) Measure the distance between sheets. If the distance is small, increase the setting. If the distance is large, decrease the setting. REf. Unit: 0.5 mm
P-INTL-U
P-INTL-L
14-218COPYRIGHT © 1999 CANON INC.
CANON imageRUNNER 400/330 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
