|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
 ;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
;
This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
;
Fast and courteous service. Product delivered as described. Thank you.
MAINTENANCE
Checking the Engine's Cooling Air Intake
Check that the engine�s cooling air intake is free from leaves, grass, and dirt. If the cooling air intake is clogged, engine cooling deteriorates, which can lead to engine damage.
Checking and Adjusting the Throttle Cable
Check that the engine responds to throttle increases and that a good engine speed is attained at full throttle. If doubts arise, contact the service workshop. If adjustments are necessary, they can be made as follows for the lower cable: 1. Loosen the clamping screw for the cable�s outer casing and move the throttle to the full throttle position. Check that the throttle cable is mounted in the correct hole in the lower lever, see illustration. Push the throttle cable�s outer casing as far to the left as possible and tighten the clamping screw.
8011-625
Check and clean the cooling air intake
2.
3.
8011-554
Adjusting the throttle cable
Checking and Adjusting the Choke Cable
If the engine produces black smoke or is dif�cult to start, this can be because the choke cable is incorrectly adjusted (upper cable). If doubts arise, contact the service workshop. If adjustments are necessary, they can be made as follows: 1. Loosen the clamping screw for the cable�s outer casing and move the choke lever to the full choke position. Check that the choke cable is mounted in the upper lever, see illustration. Push the choke cable�s outer casing as far to the right as possible and tighten the clamping screw.
8011-555
2.
Adjusting the choke cable
English-41
|
|
|
> |
|
