Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
Perfect for my use.Could have better pictures,but otherwise perfect ;)
Text excerpt from page 7 (click to view)
Controls
At
A Glance
Cycles
Located around the knob on the right side of the panel.
Options
Extended Wash provides a water temperature check early in the main wash and in the final rinse of the cycle. If necessary, the heating element turns on and the cycle extends until the water is heated to the proper temperature. 9.8 Gal. Select Extended Wash with the Heavy Wash cycle for best results when washing loads with tough food soils. AceuTemV _ provides a water temperature check later in the main wash, in addition to the final rinse. If necessary, the heating element turns on and water is heated to the proper temperature. Select AeeuTemp with any cycle (except Rinse Only) to maintain proper hot water temperature and to enhance drying results for all types of loads. ] Note: Hot water is essential for optimal cleaning and [ drying results. Heated Dry ON improves drying results by turning on the heating element during the dry portion of the cycle. Heated Dry OFF turns the heating element off during the dry portion of the cycle. Towel drying of some items may be necessary with this selection and more moisture may be noticed on the dishwasher interior.
TM
Prewash Prerinse Main Wash Prerinse Dry Prewash Main Wash Prerinse Dry Main Wash Prerinse Dry Rinse
7.8 Gal.
5.8 Gal.
1.9 Gal.
Delay Start allows you to program the dishwasher to be operated at a more convenient time or during off-peak energy rate hours. Simply turn the cycle selector knob to the desired number of delay hours and latch the door.
vapor With either dry vent area. Note: coming out of theoption, it is normal to notice [
I
Indicator
Lights
I_-Heat Delay glows to indicate that the cycle is being extended to heat water to the proper temperature. The location of the _ symbols around the knob corresponds to the heating delay portions of the cycle.
Delay Start glows when this cycle is selected. The light stays on until the start of the cycle, ¢_ Clean glows at the end of the dry cycle and remains lit until the control knob has been manually advanced to OFF.
