Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Text excerpt from page 13 (click to view)
OPERATING INSTRUCTIONS
Before first use
Initial Cleaning
Before you use the oven for the first time, you should clean it thoroughly. You can switch on the oven lighting to make cleaning easier. 1. Turn the oven function switch to oven lighting . 2. Remove all accessories and the side rails, and wash with warm water and washing up liquid. 3. Also wipe out the oven with warm water and washing up liquid, and dry. 4. Clean the front of the appliance with a damp cloth only.
i
Tip: In the case of stainless steel fronts, use commercially available stainless steel cleaners that also form a protective film against finger marks. Important: Do not use any caustic or abrasive cleaners! The surface could be damaged.
!
Setting the clock
Tip: The oven will not function until the clock is set. The clock must be set before the oven is used and whenever power has been disconnected to the appliance. If the clock needs to be set, you will see �0.00� flashing in the display.
Use �+� and �-� to set the right time. After around 3 seconds, the new time will be accepted and the display will stop blinking.
