I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 21 (click to view)
Check the following list to be sure a service call is really necessary. If the water won't drain: � Isthe hose kinkedor knotted? � ts the drain outlet clogged? If the washer does not fill: � Are the hot and cold faucets turned on? � ts the electricat cord plugged in correctly? � Has a fuse blown or is the circuit breaker tripped? If the washer � Have the controlsbeen properlyset? � is the lid closed? � ts the PauseIndicatorlit? If so, touch the START/PAUSE Pad, � Is the electrical cord pLuggedin correctly? � Turn off, let stand for 30 minutes then restarL Motor thermal protector may have engaged. � Are the hot and cold water faucets turned on? � Are the hoses kinked or knotted? � Are the hose filters clogged? if water is leaking: If a power � Are the hose connectionstight at the faucets? � Is the end of the drainhose correctlyinserted in and securedto the drainfacility? � Restartand use SPIN ONLY to drain the washer. Then, start a newcycle. failure occurs during a cycle: � Has a fuse blown or is the circuit breaker tripped? does not spin: � Is the water heater set correctly? If the water temperature is incorrect:
� Is the WATER TEMP. SELECTION set correctly? � Are the hoses connected to the correct faucets (hot to hot, cold to cold)?
If the washer is noisy:
� Is the washer level and firm to the floor? � is the load unbalanced? (Excessive vibration can occur when a load becomes unbalanced.)