|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
exactly as they say. Within 24 hours the link to the pages and offcourse it was the right service manual. Super and thanks
 ;
The manual was exact the thing that was promised. My old car stereo is working again thanks to the information supplied.
;
I PURHASED THIS PRODUCT BECAUSE I WAS HAVING PROBLEMS WITH MY CDR20 HARMAN KARDON RECORDER. WHICH I PURCHASED NEW 12 YEARS AGO. AFTER REVIEWING THE MANUAL, I WAS ABLE TO ADJUST THE TENSIONER IN THE SYSTEM. WORKS LIKE A CHAMP!.
SAVED ME AT LEAST 100.00 WHICH WAS WHAT A SERVICE REPAIR STATION WANTED. GREAT MANUAL EASY TO READ. SPECIALLY AFTER I PRINTED THE PAGES WHICH DEALT WITH MY RECORDER. THANKS A LOT!!!!!!!!
;
You can fully trust on this one!
All the schematics are very crear an in one piece per page
;
I have never bought a service manual which is as competely readable as this althogh it was a scanned pdf. Thank you for this succesful manual also cheaper than other sites.
Alignment and Adjustments
4-1-3 Screen Voltage Adjustment
1. Input a Toshiba pattern. 2. Use an oscilloscope to identify RK, BK, GK. And then adjust FBT Screen VR so that the voltage of pedestal level doesn�t exceed 160V. If a Toshiba pattern is not available, cancel the blue screen and input �No Signal� to AV IN so the voltage of pedestal level doesn�t exceed 175V. If an oscilloscope is not available, use a DC multi-meter in No Signal (black screen) to adjust RK, BK, GK so that the highest voltage becomes 160Vp-p.
4-1-4 White Balance Adjustment
1. Warm up the TV set for at least 30 minutes. 2. Enter the Service Mode by pressing the remote control keys in the following sequence: Power Off © Display © Menu © Mute © Power On 3. Initialize all set data. 4. Input a Toshiba pattern. 5. Using a probe(CA100), do the White Balance adjustments. (1) Adjust Low-Light. - Adjust Sub Brightness to set Y. - Adjust B Cutoff to set y. - Adjust R Cutoff to set x. (2) Adjust High-Light. - Adjust Sub Contrast to set Y. - Adjust B Drive to set y. - Adjust R Drive to set x. (3) Check the value of Low-Light. If necessary, readjust Low-Light. (4) Check the value of High-Light. If necessary, readjust High-Light.15
4-2
Samsung Electronics
|
|
|
> |
|
