|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
fast response great copy easy to download quick to correct mistakes
;
This manual provided the necessary information to properly use the C-3 deck. The manual was an excellent reproduction and very clear.
;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
K6 / K6 P Powering modules
The K6 and K6P powering modules power the various microphone heads of the K6 modular microphone system and provide them with a balanced microphone level output. The powering module is also the microphone body for the different heads. Please refer to the enclosed system overview for possible combinations. Versions K6 Powering module for battery or phantom powering. Switchable bass roll-off filter, on/off switch with battery condition indicator. K6 P Powering module for phantom powering only. Switchable bass roll-off filter, on/off switch. ...-C Versions supplied without accessories. K6-CL Identical to K6, but with lower sensitivity. Battery operation (K6 only) � Insert a 1.5V AA (LR6) size battery (taking care to observe the correct polarity) into the powering module and screw on a microphone head. � Switch the microphone on, checking the battery condition (the LED will blink as the powering module is switched on). If the LED is bright, the battery capacity is OK, if it is dim, the battery is low and should be replaced. � When the powering module is connected to a phantom power source, it automatically switches from battery to phantom power operation, thus conserving the battery. Phantom power operation (K6 and K6P) Both the K6 and K6P powering modules can be powered by 12-48V DC phantom power via the connection cable (phantom powering). 5
+
|
|
|
> |
|
