ANTARES KANTOS10
Owner's Manual

Note that while this kind of real-time playing can be fun, the most common filter application is to add dynamic effects by controlling it with a signal such as input dynamics or an envelope. This routing would be done in the Modulation Matrix.
MODE GENERAL EFFECT WHAT FREQ DOES WHAT Q DOES

lowpass 4 pole

reduces highs

rolls off highs at 24dB/octave starting at the selected cutoff freq rolls off highs at 12dB/octave starting at the selected cutoff freq

boosts response at the cutoff frequency and slightly lowers the level of frequencies below the cutoff frequency boosts response at the cutoff frequency (but more gently than 4 pole mode), and slightly lowers the level of frequencies below the cutoff frequency boosts a range of frequencies centered at the freq parameter narrows/widens the range of frequencies

lowpass 2 pole

reduces highs more gently than 4 pole mode

bandpass 4 pole

boosts a range of frequencies

boosts a range of frequencies centered at the freq parameter boosts a range of frequencies centered at the freq parameter rolls off lows at 24dB/octave starting at the selected cutoff freq rolls off lows at 12dB/octave starting at the selected cutoff freq

bandpass 2 pole

boosts a range of frequencies, but with a wider slope reduces lows

highpass 4 pole

boosts response at the cutoff frequency and slightly lowers the level of frequencies above the cutoff frequency boosts response at the cutoff frequency (but more gently than 4 pole mode) and slightly lowers the level of frequencies above the cutoff frequency

highpass 2 pole

reduces lows more gently than 4 pole mode

The Active button turns the filter on and off. If you don�t need a filter, turn it off to reduce the stress on your hard-working CPU. This will cause it to like you.

13