|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Happy to find finally a schematic for this amplifier. The schematic is of good quality, the pcb layout is useless: all is black. Never the less, it is very easy to find the components on the board using the schematics.
;
Hard to find manual was ready the next day. Scans were very legible (including schematics). All the essential parts of the service manual were present (adjustment procedure, schematics, and parts list). It would have been nice if the rest of the manual was included (disassembly procedure, theory of operation, etc.).
 ;
The Service Manual for the Kenwood KR-V55R provided by owner-manuals.com was as described/advertised. The contents provided the necessary information to effect a diagnosis of the unit. The schematics above all else was instrumental in tracing the the signal flow from component to component.
;
This manual was the factory original. Excellent value and contained all the details I needed. Easy dowwnload provided the information when I needed it.
;
Impeccable, document très complet. Perfect, i get all i need. All schematic are correct. Thanks
Using the DTV Features
5 Move the joystick V and v to set the day(s), time (hour, minute,
AM/PM), duration, and channel number. Press or b to confirm each setting and move to the next setting. Press B to go back to the previous setting.
6 After you�ve set the channel number, press
to save the Timer settings. The settings are displayed in the Timer screen and the Timer is set to On.
The DTV is now set to turn on, tune to the channel you�ve set, and then turn off at the times you set for that Timer. The Timer indicator on the front panel indicates the Timer is set.
To turn a Timer setting on or off � Select On or Off in step 3 (page 45). To change a Timer setting � Set the timer (Timer 1 or Timer 2) again. The old timer setting is
overwritten.
To set a second Timer setting � Set the other unset timer (Timer 1 or Timer 2).
Setting the Clock
z You can also access the
If you didn�t set the clock during the DTV�s initial setup (see page 31), you need to set it before you can set either of the Timers.
1 Press TIMER.
The Timer Setup screen appears (as shown on pag e45).
Timer through the Setup menu. For details, see page 60.
2 Move the joystick V or v to highlight Set the Clock, then press . 3 Move the joystick V and v to set the current day and time (hour,
minute, and AM/PM). Press or move the joystick b to confirm each setting and move to the next setting. Move the joystick B to go back to the previous setting.
4 When you finish setting the day and time, press
clock settings.
to save the
46
|
|
|
> |
|
