|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
ENGLISH
To drop the volume in a moment
Press briefly while listening to any source. �ATT� starts flashing on the display, and the volume level will drop in a moment. To resume the previous volume level, press the button briefly again. � If you turn the control dial, you can also restore the sound.
2
Press number button 1 to select �MOVIE��Movie category of the PSM settings.
The �Graphics� setting screen appears on the display.
To turn off the power
Press and hold for more than one second. � If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.
3
Select �Off.�
Canceling the display demonstration
When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. � It is recommended to cancel the display demonstration before you use the unit for the first time. To cancel the display demonstration, follow the procedure below:
4
Finish the setting.
To activate the display demonstration, repeat the same procedure and select �All Demo� or �Int Demo� in step 3. � For more details, see �To show the graphics on the display�Graphics� on page 38.
1
Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 36 and 37.)
The next-step-operation buttons start flashing.
8
|
|
|
> |
|
