|
|
|
Who's Online
There currently are 5919 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
 ;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
;
downloaded next day , manual is very helpful , fast and easy
KDF-E55A20/E60A20
1-17. SCREEN MIRROR BLOCK ASSEMBLY REMOVAL
Caution: When repairing anything inside the Screen Mirror Block Assembly be sure to clean the mirror and Diffusion Plate(s) to remove any dust particles. 5 Remove sixteen screws (+BVTP 4X16) TIP: The Mirror Cover assembly is securely fasten to the Screen Frame assembly. To ease removal, leave screws to secure the top right side of the Screen Frame while pulling the left side of the screen away from the Mirror Cover. Replace the Screen Frame, then remove the last two screws, then while securing the left side of the Screen Frame with your hand, pull the right side of the Screen Frame away from the Mirror Cover.
Mirror Cover assembly Pull left side of 6 Screen Frame assembly away from Mirror Cover assembly Screen Frame assembly
7 Pull right side of Screen Frame assembly away from Mirror Cover assembly
4 Four screws (+BVTP 4x16) 3 Four screws (+BVTP 4x16) 2 Remove four screws (+BVTP 4X16)
1 Remove chassis and large fan from the inside the Rear Cover to disconnect five connectors
1-18. SPEAKER REMOVAL
1
Two screws 1 (WASHER HEAD) (+P 4X16)
KDF-E55A20/E60A20
21
|
|
|
> |
|
