|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your preference.
*1 If you are using a two-speaker system, set the fader
level to �00.� * This takes effect only when a subwoofer is connected.
2
*3 Normally the control dial works as the volume
control. So you do not have to select �VOL� to adjust the volume level. *4 Depending on the amplifier gain control setting. (See page 38 for details.)
1
Select the item you want to adjust.
Each time you press the button, the adjustable items change as follows:
2
For KD-G801:
Adjust the setting.
To increase the level or
(fader)
FAD
(balance)
BAL
(loudness)
LOUD
turn on the loudness To decrease the level or turn off the loudness Indication pattern changes as you adjust the fader or balance.
VOL
(volume)
For KD-G701:
WOOFER
(subwoofer)
FAD
(fader)
BAL
(balance)
VOL
(volume)
LOUD
(loudness)
Indication FAD*1
To do: Adjust the front
Range R06 (Rear only)
Ex. 1: When you adjust �FAD� (fader) LOUD indicator
and rear speaker | balance. F06 (Front only) BAL Adjust the left L06 (Left only) and right speaker | balance. R06 (Right only) Boost low and high frequencies LOUD ON to produce a | well-balanced LOUD OFF sound at low volume level. WOOFER*2 Adjust the (only for KD-G801) VOL*3 subwoofer output level. Adjust the volume. 00 (min.) | 08 (max.) 00 (min.) | 30 or 50 (max.)*4
LOUD
Ex. 2: When you turn on the loudness
3
Repeat steps 1 and 2 to adjust the other items.
31
ENGLISH
|
|
|
> |
|
