JVC KD-G807EU
Owner's Manual

SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your preference.

*1 If you are using a two-speaker system, set the fader
level to �00.� * This takes effect only when a subwoofer is connected.
2

*3 Normally the control dial works as the volume
control. So you do not have to select �VOL� to adjust the volume level. *4 Depending on the amplifier gain control setting. (See page 38 for details.)

1

Select the item you want to adjust.
Each time you press the button, the adjustable items change as follows:

2
For KD-G801:

Adjust the setting.
To increase the level or

(fader)

FAD

(balance)

BAL

(loudness)

LOUD

turn on the loudness To decrease the level or turn off the loudness Indication pattern changes as you adjust the fader or balance.

VOL
(volume)
For KD-G701:

WOOFER
(subwoofer)

FAD
(fader)

BAL
(balance)

VOL
(volume)

LOUD
(loudness)

Indication FAD*1

To do: Adjust the front

Range R06 (Rear only)

Ex. 1: When you adjust �FAD� (fader) LOUD indicator

and rear speaker | balance. F06 (Front only) BAL Adjust the left L06 (Left only) and right speaker | balance. R06 (Right only) Boost low and high frequencies LOUD ON to produce a | well-balanced LOUD OFF sound at low volume level. WOOFER*2 Adjust the (only for KD-G801) VOL*3 subwoofer output level. Adjust the volume. 00 (min.) | 08 (max.) 00 (min.) | 30 or 50 (max.)*4

LOUD

Ex. 2: When you turn on the loudness

3

Repeat steps 1 and 2 to adjust the other items.

31

ENGLISH