|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
THANK YOU FOR A GOOD TRANSACTION, NICE COPY, CLEAR
;
Very Good! All the diagram are easy to read, and its complete.
;
This was an excellent source of detailed assembly information on a device which is at least 12 years old. A very lucky find, coupled with great service.
;
Excellent Service Manual and best price on the Internet. This Service Manual covers everything you could ever need including full circuit schematics, component layout diagrams, stripdown procedure and full parts list/breakdown. I needed this to carry out a modification to one of these headunits and this manual covered everything I needed. Fast delivery, processed within a few hours.
 ;
Thought I would never find a copy of the Technics SX-EN2 Service Manual until I found Owner-Manuals.com. Price was very fair and I received the download promptly. While a photocopy, it is quite readable and includes all the pertinent information and diagrams. Thank you Owner-Manuals!
KD-LH1000
Feed section
Is the voltage output at NO IC621 pin "40" 3.3V or 0V? YES Is 4V present at both sides of the feed motor? YES Check the feed motor. NO Is 6V or 2V present at IC681 "4" and "5"? NO Check IC681. Is the wiring for IC621 (56)~(64) correct? NO YES Is 3.3V present at IC681 pin "20"? YES Check the vicinity of IC621. YES Check the feed motor connection wiring. NO Check CD 8V and 5V.
Focus section
When the lens is moving: 4V
Does the S-search waveform appear at IC681 pins "10" and "11"?
NO
Check the circuits in the vicinity of IC681 pins "10","11"and"14". YES
YES
Check the pickup and its connections
Spindle section
Is the disk rotated? YES Does the RF signal appear at TP1? YES NO Is 4V present at IC681 pins "6" and "7"? YES Check the spindle motor and its wiring NO NO Is 3.3V present at IC621 pins "41" ? YES Check the vicinity of IC681. Check IC621 and IC601. NO
Is the RF waveform at TP1 Check the circuits in the distorted? NO vicinity of IC601 "19"~ "24" or the pickup YES Proceed to the Tracking section
Tracking section
When the disc is rotated at first:
YES
Approx. 1.2V Is the tracking error signal output at IC601 "11"?
Check the circuit in the vicinity of IC601 pins "2"~"12".
YES
Check the pickup and its connections
YES Check IC621.
1-20
|
|
|
> |
|
