|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
 ;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
;
downloaded next day , manual is very helpful , fast and easy
;
This Service Manual was exactly what I needed to repair my Philips TV. The purchase was convenient and I received the manual at the same day I paid for it.
KDS-100
OPERATING FEATURES / INSTALLATION
Front panel
1 2
TK-780/880/980/981 Series (TK-*80 Series)
s Installing the KCT-34 in the Transceiver
1. 2. 3. 4.
6 7
Remove the upper cover from the transceiver. Lift the DC cord bushing ( 1 ) from the chassis. Remove the pad as shown in the Figure 1 ( 2 ). Insert the KCT-34 cable ( 3 ) into the chassis ( 4 ). The wire harness band ( 5 ) must be inside the chassis. 5. Replace the DC cord bushing ( 6 ). 6. Connect the KCT-34 to the TX-RX unit (A/2) as shown in Figure 2 ( 7 ).
Connector Wire Color Brown NC NC Orange Gray NC Yellow Blue Pin No. Connector 4 � � 5 10 � 6 8 B-1 B-2 B-3 C-1 C-2 C-3 D-1 D-2 D-3 Wire Color NC White Green Purple Light blue Light green NC Black Red Pin No. � 11 7 9 14 15 � 3 1
3
4
5
A-1 A-2 A-3 A-4 A-5 A-6 A-7 A-8
1
Display
Messages appear on this 240 x 64 dot LCD.
2
LED Indicator (default settings)
Lights red while �talking� to the mobile unit. Lights green while �listening� to the mobile unit. Flashes orange when a message is waiting.
3
MENU key
Press to enter the Menu mode, in order to select your desired menu.
4
Keys 1 ~ 5
Press these function keys to perform the functions described in the status bar on the display, directly above the keys.
5
SEL (Select) key
Press to select the displayed item.
1
6
v key
Press to scroll up the display.
2
7
w key
Press to scroll down the display.
Fig. 1
A
CN4
BCD
CN1 CN2
B C D
CN3
A 5 4 3
6
KCT-34
13 1 3
7
15
KDS-100 or through KCT-36 extension cable.
2
Fig. 2
|
|
|
> |
|
