|
Categories
|
Information
|
Featured Product
|
|
|
 |
|
There are currently no product reviews.
 ;
Excellent quality and quickly delivered manuals at a fair price. Great care is taken in the reproduction process. Even photographs and highly detailed drawings are as clear as in the original. That cannot be said for some freelance manual copies I have obtained from the web. If you have exhausted your internet search of technical manuals, try Owner-Manuals.com. If they do not have it, I do not think it exists. Perhaps, if requested, they may be able to find it. Their resources are certainly greater than most. Shopping here certainly beats waiting for months or years for the manual you seek to appear in an internet auction or garage sale.
 ;
Very detailed product, also it is a scanning from original, very useful if you have to service this type of amplifier ! Very good product, very hard to find!
 ;
the Manual was made available as promised, the scans were excellent..Good Work !!!
 ;
It's complete and helpful manual with good quality of scan. Thanks very much.
 ;
The service was quick and simple, finding the service manual easy and it appears to be the original with colour schematics. It contained the info I was after and so sorted the problem.
I have copied it to CD and attached the envelope to the inside back cover of the owners manual. Good manual and excelent service. Robin Wood, Wood Electronics, New Zealand.
KD-SH707R
3. Remove the three screws B on both sides of the body. 4. Remove the screw C and the three screws D on the left side of the body. 5. Remove the two screws E and the screw F on the back of the body. 6. Move the top chassis upward and remove it with the CD mechanism assembly. The connector on the CD mechanism assembly is disconnected connector CN601 on the main board. from
Top chassis
B
Fig.4
B
C
Top chassis
Heat sink
D
Fig.5
B
E
F
Fig.6
Removing the (A) board (See Fig.7)
Prior to performing the following procedure, remove the top cover. 1. Disconnect the wire from connector CN601 on the (A) board. 2. Remove the five screws G and the (A) board, releasing the joint a and b.
G
CN601
a
b
G
Fig.7 1-5
|
|
 |
> |
|