|
Categories
|
Information
|
Featured Product
|
|
|
 |
|
There are currently no product reviews.
 ;
Was very fast and accurate service. Just what I needed. I recommend to everyone.
 ;
Very good scan quality, only PC Board scan not enough contrast.
 ;
First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
 ;
Good service manual. I gat all I want. Copy is good, but could be better. All clear and useful. I sincerely recommend.
 ;
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
KD-SX777
Main amplifier board CN501
Removing the main amplifier board assembly (See Fig.4 and 5)
1. Remove the front chassis. 2. Remove the bottom cover. 3. Remove the two screws C attaching the main amplifier board assembly on the bottom of the body. 4. Remove the three screws D attaching the main amplifier board assembly on the back of the body. 5. Disconnect connector CN501 on the main amplifier board assembly from the CD mechanism assembly.
C
Fig.4
C
D
D
Removing the CD mechanism assembly (See Fig.6 )
1. Remove the front chassis. 2. Remove the bottom cover. 3. Remove the main amplifier board assembly. 4. Remove the three screws E attaching the CD mechanism assembly from the top cover. Top cover CD mechanism assembly
Fig. 5
E
E
Removing the control switch board (See Fig.7 and 8 )
1. Remove the front chassis. 2. Remove the four screws F attaching the rear cover on the back of the front panel unit. 3. Remove the control switch board from the front panel unit.
Fig. 6
E F
F
F
Fig. 7 Control switch board
F
Fig. 8
1-5
|
|
 |
> |
|
|
Parse Time: 0.193 - Number of Queries: 138 - Query Time: 0.036