|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Easy and secure way to get a complete service manual of a vintage hifi component. Only some parts of the print copy are dificult to read. Nice price!
 ;
The manual is an excellent reproduction with complete schematics, made troubleshooting and repair a simple process.
;
Up to now you are the BEST! Prompt-efficient and so reasonable ! I have been after SONY service manual for quite some time !Thank you very much ! I can recomend your service to
all my collegagues ! V.Bergfield .
;
This is a very good quality print (scan) of the original SONY service manual. The original from Sony is on very thin paper. Nevertheless it is very clear and sharp and excellent readable. I'm very satisfied to have now this rare document. I've looking for it many years (infrequent). It contains very detailed circuit diagrams, exploded views, part lists, PCB view with good readable connection lines. Very recommended.
;
A complete manual with all the needed details of calibrations and service instructions about the radio receiver.
A big deal.
Many thanks !
KD-SX985
Feed section
Is the voltage output at IC521 pin "40" 5V or 0V? YES Is 4V present at both sides of the feed motor? YES Check the feed motor. NO Is 6V or 2V present at IC561 "4" and "5"? NO Check IC561. NO Is the wiring for IC521 (56)~(64) correct? NO YES Is 3.3V present at IC561 pin "20"? YES Check the vicinity of IC521. YES Check the feed motor connection wiring. NO Check CD 8V and 5V.
Focus section
When the lens is moving: 4V
Does the S-search waveform appear at IC561 pins "8" and "9"?
NO
Check the circuits in the vicinity of IC561 pins "8","9"and"15". YES
YES
Check the pickup and its connections
Spindle section
Is the disk rotated? YES Does the RF signal appear at TP1? YES NO Is 4V present at IC561 pins "6" and "7"? YES Check the spindle motor and its wiring NO NO Is 4V present at IC521 pins "41" ? YES Check the vicinity of IC561. Check IC521 and IC501. NO
Is the RF waveform at TP1 Check the circuits in the distorted? NO vicinity of IC501 "19"~ "24" or the pickup YES Proceed to the Tracking section
Tracking section
When the disc is rotated at first:
YES
Approx. 1.2V Is the tracking error signal output at IC501 "11"?
Check the circuit in the vicinity of IC501 pins "2"~"12".
YES
Check the pickup and its connections
YES Check IC521.
1-21
 $4.99 KD-SX985 JVC
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|
