|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I am only search for 5 Minute, by it in 5 Minutes to and get ist in few ours! Best i found in the Internet and my Amplifer is repaired as well! Thank you
 ;
Readable text and good copy. Very much needed if you wish to do some repairs on this fine old unit.
;
Fint forløb med levering af manualen. Kvaliteten af skanningen betegnes som middel
;
I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
;
I will highly recommend this seller. They are honest, accurate, fast and responsible.
KEH-P424,P4700,P4750
7.2 DISASSEMBLY
- Removing the Case(not shown) 1. Remove the three screws. 2. Remove the Case. - Removing the Cassette Mechanism Module
(not shown)
1. Remove the four screws. 2.Disconnect the connector, and then removing the Cassette Mechanism Module. - Removing the Detach Grille Assy(Fig.22) 1. Push the detach button. 2. Remove the Detach Grille Assy. - Removing the Panel Unit(Fig.22) 1. Disengage the stopper at four locations indicated by white-arrows and then remove the Panel. 2. Disengage the stopper at two locations indicated by black-arrows. 3. Remove the Panel Unit.
Fig. 22
- Removing the Tuner Amp Unit(Fig.23) 1. Removing the two screws A, three screws B and screw C. 2. Unbend the tabs at four locations indicated by arrow until straight. 3. Remove the Tuner Amp Unit.
Fig. 23
42
|
|
|
> |
|
