|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
 ;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
;
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
How to Use the Mixer
Be sure to read and follow the specific instructions in this manual for proper use of this mixer.
WARNING
Injury Hazard Unplug mixer before touching beaters. Failure to do so can result in broken bones, cuts or bruises. To Attach Accessories 1. Make sure the Speed Control is in the �OFF� position. 2. Unplug the mixer from the electrical outlet. 3. Each pair of accessories (TurboBeaters, optional Dough Hooks included with Model KHM5DH) will have one accessory with a collar (D), and one without (C). The hand mixer has a specific opening for each. Single accessories, like the optional Pro Whisk or Liquid Blender Rod (included with Model KHM5TB), will always have a collar (D).
A B
5. Insert the accessory without a collar (C) into the smaller opening (A) of the hand mixer. Line up the flanges on the accessory with the slots in the opening and push in until it locks into place.
E
3 2 1
OFF
Electroni c Control
D C
To Remove Accessories 4. Insert the accessory with a collar (D) into the larger opening (B) of the hand mixer. Line up the flanges on the accessory with the slots in the opening and push in until it locks into place. 1. Make sure the Speed Control is in the �OFF� position. 2. Unplug the mixer from the electrical outlet. 3. Press the Ejector Button (E) to release the accessories from the mixer, then remove them.
8
|
|
|
> |
|
