|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I have this hi-fi system for a long time and I need to repair some things. Founding this manual will be very helpfull :)
 ;
It is pretty good. The schematics were covered all components, the manual also provide the parts list . It's useful for the trouble shooting.
;
Very fast service, best quality of the service manual and the schematics
;
This service manual of the old video cassette recorder VT-LC50EM is very good readable even the tiniest numbers (i.e. IC-pins). The circuits are very clear. Many details of the schematic are very good described but in GERMAN language. Many schematic details - but complete at all. Common background information of several details are enclosed and physical knowledge of the TFT liquid crystal display for example. The manual lacks PCB drawings. If you understand german I would recommend this manual for you.
;
Hi, this is a very clear manual, nice copy, not quite up to the standard of the very best available but better than many others. I think the price was especially fair for a hard to find manual and I would certainly use this manual seller again. Recommended.
17. DISASSEMBLY PROCEDURE
1. Remove the battery cover, batteries and ink ribbon cassette. 2. Loosen 9 screws ¬ on the lower case ®, and open the lower case. 3. Remove 6 wires from the buzzer � and battery terminals with the help of fusing these welds. 4. Take out the connectors CN3 and CN4 on the PCB-1 ass�y 1, and loosen 3 screws x on the PCB1 ass�y. 5. Take the FPC tape of chassis ass�y D away from PCB-1 ass�y 1, and loosen 2 screws | on the PCB-1 ass�y 1. 6. Loosen 10 screws | on the PCB-E4 ass�y 4, 2 screws | on the LC holder 0. Then remove the PCB-1 ass�y 1 and the PCB-E4 ass�y 4 from the upper case t. 7. Loosen 3 screws x on the chassis ass�y D and take the chassis ass�y away from the upper case t. 8. Take out the spring I and remove the tape holder ]. 9. Loosen 2 screws W on the scissors sub ass�y G, and take out the spring J. Then remove the scissors sub ass�y G. 10. Loosen 4 screws x on the dial holder b, and take out the dial elements.
� 31 �
|
|
|
> |
|
