|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent service from this company (including a total refund on an earlier purchase when through no fault of the company the manual was incomplete). I have purchased several manuals which I have been very satisfied with, as I am with this one. Highly recommended.
 ;
It was easy to order and received exactly what I needed. Only complaint would be the 24 hours you have to wait.
;
Manual was delivered in a timely manner and was all in English as advertised. The manuals I received when we moved into our flat were in German, Italian, and French. Having never used a steamer before, and not speaking/reading German very well, I needed an English Manual. this was a huge help.
;
Great Manual. This manual is available no where else. It was exactly what I was looking for. Only in German.
;
This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
KP-43T70/46C70/48S70/ 48S72/53N74/53S70/61S70
RM-Y906
[RED REGISTRATION ADJUSTMENT]
<RED CENTER> 1. Change to VPNT mode and set VPNT 28 RON to �001�, 29 GON to �001� and 30 BON to �000� to show the green and red colors. 2. Change the VPNT mode to the PJE mode. 3. Press 3 key on the remote commander to shift the GRN mode to the RED mode. 4. Select RED CENT with the 1 and 4 keys on the remote commander. 5. Adjust the red crosshatch lines go straight vertically and horizontally and overlaps the green lines with the joystick on the remote commander. <RED SKEW> 1. Select RED SKEW with the 1 and 4 keys on the remote commander. 2. Adjust the red crosshatch lines go straight vertically and horizontally and overlaps the green lines with the joystick on the remote commander. <RED LINEARITY> 1. Select RED SIZE (vertically and horizontally) or RED LIN (vertically) with the 1 and 4 keys on the remote commander and adjust while tracking each other alternately. 2. Adjust the red crosshatch lines go straight vertically and horizontally and overlaps the green lines with the joystick on the remote commander. <RED KEY> 1. Select RED KEY with the 1 and 4 keys on the remote commander. 2. Adjust the red crosshatch lines go straight horizontally and overlaps the green lines with the joystick on the remote commander. <RED PINCUSHION> 1. Select RED PIN with the 1 and 4 keys on the remote commander. 2. Adjust the red crosshatch lines go straight horizontally and overlaps the green lines with the joystick on the remote commander. <FINE ADJUSTMENT> 1. Press 9 key on the remote commander to shift to the fine adjustment mode. The red marker (in the RED mode) appears on the center of the screen.
2. Use the 1 and 4 keys or the joystick on the remote commander, move the marker everywhere you want to adjust and adjust with the joystick on the remote commander.
[BLUE REGISTRATION ADJUSTMENT]
1. Change to VPNT mode and set VPNT 28 RON to �001�, 29 GON to �001� and 30 BON to �001� to show full color. 2. Change the VPNT mode to the PJE mode. 3. Press 3 key on the remote commander to shift the RED mode to the BLU mode. 4. Adjust BLU CENT, BLU SKEW, BLU SIZE, BLU LIN, BLU KEY and BLU PIN in the same procedure of the red registration adjustment.
[FINAL CHECK]
1. Store the new adjustment (offset) value on the remote control by pressing [MUTING] and [ENTER]. 2. Press the FLASH FOCUS button on the front panel. (The Offset value is now automatically stored.) 3. Check that no error message appears. If an error message appears, recheck.
� 45 �
 $4.99 KP43T70 SONY
Service Manual Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…
|
|
|
> |
|
