|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very pleased with the quality of the scan. No complaints whatsoever.
 ;
I liked the product. I would use their sevices again.
;
I Recently purchased yet another Service Manual from Owner-Manuals.com, this time for a Sony EVS700ES/UB Videocassette Recorder. The Manual was available for upload within two hours and is an Extremely Good copy, as some of this I was able to enlarge to get even better detail.
Once Again, Very happy with the result!
;
A good and useful manual. With these, We was abled to isolate and pin point the component that was causing the problem. The total time spent in troubleshooting is very much reduced.
;
The quality of the manual is top. The transfer worked perfect and fast.
No problems at all. Recommendable
Watching Two Programs at One Time � PIP
The Picture-in-Picture (PIP) feature allows you to view two channels simultaneously, one in the full size �main� picture and one in a smaller �window� picture. You can move the window picture to any location on the screen. (Free Layout Picturein Picture)
The symbol �b� or �B� indicates which picture's TV channel or input source can be changed. The symbol �9� indicates which picture's sound is being received.
6
Using the Yellow Labeled Buttons for PIP Operations
PIP
Press to display a window picture. Each time you press this button, the picture size will change (1/9 t1/16 tno display). To close the window picture, press PIP repeatedly until it disappears.
POSITION
Press POSITION repeatedly to change the location of the window picture (counterclockwise) around the main picture. You can also change the location by pressing the V, v, B or b button. The window picture moves in the direction of the arrow indicated on the pressed button.
or
Main picture
TV channel or inputsource mode for the main picture* (yellowgreen-colored) TV channel or inputsource mode for the window picture* (white-colored)
10
ACTIVE
Press to select either the main or window picture in order to change the TV channel or video source using the white labeled buttons below. The symbol �b� (or �B�) will appear to indicate which picture�s channel or input mode can be changed.
Window picture
* It will dim in about 3 seconds:
TV/VIDEO
Press repeatedly to scroll through the available video inputs for the picture on which the symbol �b� (or �B�) is displayed. (see �TV/VIDEO� on page 21)
Notes: � The aux antenna input on the rear panel will not be able to be selected in the PIP window. � If you use a cable box connection, you will not be able to watch two different programs at the same time.
(white labeled button)
Tip z
If you press RESET in PIP mode, the window picture will move to the bottom right (factory-preset location).
23
|
|
|
> |
|
