SONY KP53V90
Service Manual

Using Your New Projection TV (continued)
Using the Yellow Labeled Buttons for PIP Operations
CH

JUMP
or

0-9
and ENTER

or

Press to select the TV channel on which the symbol �b� is displayed. (for details, see �Watching the TV� on page 20) Speed Surf 1 Press and hold CH + or � to change the channel number rapidly. 2 Release to display the desired channel.

REFER TO THE ILLUSTRATION OF THE REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THIS CHART

(white labeled button)
ANT

Press to change between the VHF/UHF input and the AUX input for the picture on which the symbol �b� (or �B�) is displayed.

(white labeled button)
AUDIO
Press to alternate sound between the main picture and the window picture. The symbol � � will appear for a few seconds to indicate which picture�s sound is being received. This is useful when you need to copy down information of the main picture. Press to freeze the desired scene in the main picture. The frozen picture is displayed in the window picture while viewing the normal picture in the main picture. The window picture size is automatically changed to 1/9 if it was 1/16. Press again to resume normal PIP viewing. Press to switch the audio and video of the main picture and the window picture. Each time you press SWAP, the picture and sound of the two will be exchanged.

Note: � If one of the pictures received through PIP is snowy, the entire screen may become unstable. In this case, erase the snowy channel. (see �Channel Skip/ Add� on page 31)

FREEZE

SWAP

24