|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I do not have very much to say.
The price is quite covenient, delivery was better as promised (about 12 ours, against the specified 24 hours if I remember well), and the quality of the PDF is more than acceptable.
The Service Manual of Sansui R30 itself is also satisfactory: good graphic for schematics and layouts, simple and well structured.
Giovanni Bianchi
;
Happy to find finally a schematic for this amplifier. The schematic is of good quality, the pcb layout is useless: all is black. Never the less, it is very easy to find the components on the board using the schematics.
;
Hard to find manual was ready the next day. Scans were very legible (including schematics). All the essential parts of the service manual were present (adjustment procedure, schematics, and parts list). It would have been nice if the rest of the manual was included (disassembly procedure, theory of operation, etc.).
 ;
The Service Manual for the Kenwood KR-V55R provided by owner-manuals.com was as described/advertised. The contents provided the necessary information to effect a diagnosis of the unit. The schematics above all else was instrumental in tracing the the signal flow from component to component.
;
This manual was the factory original. Excellent value and contained all the details I needed. Easy dowwnload provided the information when I needed it.
KP-EF41HK2/ME2/MN2/SN2, EF48HK2/ME2/MN2/SN2, KP-EF53HK2/ME2/MN2/SN2 RM-871
GREEN HORIZONTAL SYMMETRICAL PIN DISTORTION ADJUSTMENT
GREEN VERTICAL 4TH ORDER DISTORTION ADJUSTMENT
1. Adjust GH MPIN to correct pin distorton at both edges of the centre section. 2. Use GH PIN to correct pin distortion at both edges of the screen. 3. While tracking adjust GH MPIN and GH PIN so that the PIN of vertical lines on the entire screen have no bowing. 4. If there is asymmetrical distortion after adjustments, readjust GH MBOW and GH SBOW while tracking.
1. By using GV 4 PIN, 4th-Order distortion of the horizontal lines at the top & bottom can be corrected. Since there is no 4SBO for vertical correction, there will be a slight imbalnace, but adjust the registration to eleiminate any distortion. GV 4PIN
M PIN PIN
GREEN VERTICAL TRAPEZOIDAL DISTORTION ADJUSTMENT
1. Adjust GV SSKW so that the tilt of the horizontal lines at the top and bottom of the screen are symmetrical. 2. Adjust GV MKEY so that there is no tilt for the middle section. 3. Adjust GV KEY so that there is no tilt at the top and bottom of the screen. 4. While tracking adjust GV MKEY and GV KEY, so that there is no tilt over the entire screen. 5. If the tilt is unbalanced after GV MKEY and GV KEY have been adjusted, readjust GV SSKW.
GH MBOW
GH PIN
GH SBOW
GH MPIN
GV SSKW
GREEN VERTICAL WAVE (3RD-ORDER) DISTORTION ADJUSTMENT
1. Check the screen at the top & bottom, and look for any 2nd or 3rd order waveform distortion of horizontal lines. Correct with GV WAVE. 2. While tracking adjust GV WAVE and GV KEY, if here are any KEY distortion.
MKEY KEY
GV WAVE
GV KEY
GV SSKW
GV KEY
GV MKEY
� 46 �
|
|
|
> |
|
