|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Station Preset Memory
Putting the station in the memory.
2
Call up the station Press the [#1] � [#6] button.
1 2 3
Select the band Press the [FM] or [AM] button. Select the frequency to put in the memory Press the [4] or [¢] button. Put the frequency in the memory Press the [#1] � [#6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [#1] � [#6] button.
CRSC (Clean Reception System Circuit)
Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. Press the [CRSC] button for at least 1 second. Each time the button is pressed CRSC turns ON or OFF. When it's ON, the " "(CRSC) indicator is ON.
Auto Memory Entry
Putting stations with good reception in the memory automatically.
Frequency Step Setting
Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz.
1 2
Select the band for Auto Memory Entry Press the [FM] or [AM] button. Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.
1 2
Turn the power OFF Press the [SRC] button for at least 1 second. Switch the frequency step While pressing the [#1] and [#5] button, press the [SRC] button. The frequency step changes to FM band 200 kHz, and AM band 10 kHz.
� When the same operation is repeated, it returns to the original setting. � When the frequency step is switched, the frequencies in the memory are deleted.
Preset Tuning
Calling up the stations in the memory.
1
Select the band Press the [FM] or [AM] button. �9�
|
|
|
> |
|
