|
There are currently no product reviews.
 ;
This Manual (as downloaded) is both informative and comprehensive and has proved to be extremely useful. thoroughly recommended.
;
everything is ok, thank you very much! Product is good, no problems with download!
;
Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
Setup of the remote control unit
KRF-V7771D (En/T)
16
Setting up the remote control according to your receiver
Perform the following procedure after inserting batteries for the first time or when the remote control back-up data has been lost.
Low battery alarm
Low Batter y
Preparations
÷ Press the POWER key and ON/STANDBY key of the receiver to turn it ON.
When the alarm message appears to indicate that the remaining power is low, replace all the batteries with new ones.
Model Type Setup
1 Loading batteries
1 Remove the cover.
1
2 3
2 Insert batteries.
3 Close the cover.
÷ Insert four AA-size (R6/UM-3) batteries as indicated by the polarity marking. ÷ To maintain the memory of the settings you made before, complete the battery replacement operation within 30 seconds.
2 Check the display.
Model Type Setup
The �Model Type Setup� screen appears.
Model 1 Model 2
÷ If the remote control backup data is kept stored when the batteries are replaced, the �Model Type Setup� menu screen is not displayed. In this case, operations in 2, 3, 4 are not necessary.
Setup
2
3 Move the cursor to � Model 2 �.
÷ It can be moved in 4 directions, depending on how you select the icon.
Model Type Setup
ENTER
Move the cursor.
Model 1 Model 2
4 Enter the selection.
Press the ENTER key.
ENTER
÷ After selecting an icon, always be sure to press the ENTER key to enter the selection.
To reset the remote control
1 Open the cover and remove batteries. 2 Press the reset button with the tip of a thin object for a few seconds. ÷ This operation clears all of the previously set-up data.
1
|
