|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
About one hour after checkout, the manual was available for download. Clear reading and detailed. Thanks
;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
Item
OS D
Range
29A7
REMARK DDP3310 R,1AEhex BIT(7:5) -USER PEAKING CONRTOL REDUCTION (The bigger the value is the larger the amount of REDUCTION) VPC3230 FP BLOCK R,52hex (BIT(7:0)), R,53hex(BIT(5:0))
00
PKRD
0-7
3
01
BRCT
0-1
0
Reproduce the levels under BLACK LEVEL (When the level=1,the levels under BLACK LEVEL are reproduced)
02 03 04
R DRIVE B DRIVE G DRIVE
0-255(X2) 0-255(X2) 0-255(X2)
200 200 200
WHITE DRIVE CONTROL - After all the SCREEN adjustments are complete, fix the value of G DRIVE and adjust HIGH LIGHT WHITE BALANCE. DDP3310 R,1B1hex Bit <5:0> (Use 12 steps out of 63 steps
05
Sub Cont
0-12
6
to add the value of sub cont to the contrast control of picture control) DDP3310 R,168hex (Internal brightness for measurement) - Fixed Value by CRT
06 07 08 09
Lbrm R Cutoff B Cutoff G Cutoff
0-255 0-255 0-255 0-255
180 80 80 80
CUTOFF DRIVE CONRTOL - After all the SCREEN adjustments are complete, fix the value of G DRIVE and adjust LOW LIGHT WHITE BALANCE. DDP3310 R,167hex Bit<15:6>(Add the value of Sub
10
Sub Brt.
0-20(X8)
6
Brightness to Brightness Control of Picture Control) DDP3310 R,1B2hex Bit<15:9>(Use 12 steps out of 63 steps to add the value of sub color to the color control of picture control)
11
Sub Color
0-12
8
12 13 14 15 16 17 18 19 20
Sub Tint V Peaking Svm Gain Svm Delay Svm Limit Ttx Cont Ttx brt Pip Cont Bcl Thrs
0-12 0-12 0-63 0-15 0-255 0-255 -128-127 0-15 0-255(X8)
4 7 32 5 85 120 15 0 41
VPC3230 FP Sub R,DChex - NTSC only VPC3230 FP Sub R,28hex Bit<11:8>(Vertical peaking control) DDP3310 R,1A7hex Bit<5:0>(VM gain control) DDP3310 R,19Bhex Bit<3:0>(VM gain control) DDP3310 R,19FBhex Bit<7:0>(VM limit value control) Set TTX mode conrtast level DDP3310 EXT BRIGHTNESS SDA9489X R,11hex Bit<7:4>(PIP contrast adjustment) DD3310 R,160hex Bit <15:4>(ABL thresh hold setting) - Set ABL Operation Point (Cuve Point)
4-10
Samsung Electronics
|
|
|
> |
|
