Even if the PDF is a scan, I can read the information I need.
The price is affordable and the service (mail sending) is very fast.
Thanks ! Regards. William (Fan of Kenwood)
Excellent just what I needed to replace the electrolytic caps and make this old gem a beauty again. Was as scan of the original photocopied service manual.
It was helpful to get schematic with waveforms in important points and lot of service information. Manual is good quality, fast delivered. Of course it is hardcopy of paper one with all its disadvantages.
Text excerpt from page 5 (click to view)
KS-FX202
Removing the cassette mechanism assembly ( See Fig. 8 )
1. 2. 3. 4. 5. Removing the front chassis. Removing the bottom cover. Removing the heat sink. Removing the main board assembly. Remove the four screws ( 6 ) retaining the cassette mechanism. 6. Separate the top chassis and cassette mechanism.
Cassette mechanism 6 6
Front side
6 Top chassis Fig. 8
g A Front cover g
6
g 7 h h
Removing the operation switch board ( See Fig. 9 to 11 )
1. Detaching the front panel unit. 2. Turn the front panel back side down. 3. Remove the four screws ( 7 ) retaining the front cover. 4. Open the front cover gradually by disengaging the three engagements ( g ) while pushing the top of the front cover in the arrow "A" direction, then disengage the three engagements ( h ) on the both sides. 5. Place the front panel unit front side down. 6. Disengage the three engagements ( i ) on the bottom to separate the front cover from the front panel. (Be careful not to lose the button springs.)