|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
tres bon document
cela a permis de verifier la connection de l'ecran
merci
salutations
;
The manual was of good quality with high resolution schematic diagrams.
;
The manual was very clear and contained all the information I was looking for. My dishwasher is working again because of this servicemanual!
;
Quality scan, great manual. I solved my problem with this manual.
 ;
The AKAI 1720 model reel to reel tape recorder described in this Manual is quite an old unit - circa late 1960's. As a consequence, the description of the mechanical details - and adjustments thereof - is quite critical. The manual does this quite well. The schematics are also well presented and have detailed PCB overlays. Probably the only negative is that some half-tone detail has been lost from the original manual as it has been scanned in simple B&W.
KS-FX611
Cassette mechanism ass�y
<Removal of the cassette mechanism> Removing the head amplifier board. (See Fig.1 and 2)
1. For the 6pin wire extending from connector CN402 on the head amplifier board, disconnect it from the head relay board. 2. Disconnect the card wire from connector CN403 on the head amplifier board. 3. Remove the screw A attaching the head amplifier board. 4. Move the tab a as shown in Fig.2 and remove the head amplifier board while moving it in the direction of the arrow.
CN402 CN403 CN402 Head relay board
6pin wire
CN403 Head amplifier board
Fig.1
Removing the cassette assembly (See Fig.1 to 3)
mechanism
A
Head amplifier board
1. Disconnect the 6pin wire from connector CN402 and the card wire from CN403 on the head amplifier board (Refer to Fig.1 and 2). 2. Remove the four screws B cassette mechanism. on the bottom of the
Tab a
Fig.2
B
Cassette mechanism ass�y
Head amplifier board
B
Fig.3
1-7
|
|
|
> |
|
