|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Once again owner-manual.com has saved the day for me, and come through with the manual I need. I looked other places too, and couldn't find it anywhere. Thank You owner-manual.com!!! You're the BEST!
;
very good quality that can be magnified several times, and it remains readable.
For sure I will return next time the need for a service manual arise.
;
The service manual is really great - thanks to it I was able to install the laser unit and thus "save" my CD-player, which seemed to be impossible before I had the manual.
;
Downloaded the Service manual OK of the Technics Piano and have now repaired it and its going fine. Excellant; thank you for the fine servce. A.M
 ;
This site is working fine! Did buy a manual for SX-EX25L and after a while I could download it and fix the problem. Nice and easy!
KS-FX8
2.1.6 Removing the main board (See Fig.7) � Prior to performing the following procedures, remove the front panel assembly, bottom cover, front chassis assembly, heat sink and rear panel. (1) Remove the two screws H attaching the main board on the top chassis. (2) Disconnect the connector CP701 on the main board from the cassette mechanism assembly.
Main board
H
H
CP701
Fig.7 2.1.7 Removing the cassette mechanism assembly (See Fig.8) � Prior to performing the following procedures, remove the front panel assembly, bottom cover, front chassis assembly, heat sink, rear panel and main board. (1) Disconnect the card wire from the connector CN403 on the mecha board. (2) Remove the four screws J attaching the cassette mechanism assembly from the top chassis, take out the cassette mechanism assembly. (3) From the bottom side of the cassette mechanism assembly, disconnect the wire from the connector on the head board.
Cassette mechanism assembly
J
J
Connector
Head board
Mecha board
J
CN403
Fig.8
J
Top chassis
2.1.8 Removing the mecha board (See Fig.9) � Prior to performing the following procedures, remove the front panel assembly, bottom cover, front chassis, heat sink, rear panel, main board and cassette mechanism assembly. (1) Remove the screw K attaching the mecha board. (2) Bend the hook f in the direction of the arrow 1 and move the mecha board in the direction of the arrow 2. (3) Remove the mecha board from the mecha bracket (L) of the top chassis.
Top chassis
Mecha board Hook e
K
2
1
Mecha bracket (L)
Fig.9
(No.49826)1-5
|
|
|
> |
|
