|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent copies.
I will use "Owner Manual" again a second time.
 ;
Very good manual for Technics SL 303. Manuale molto utile.
;
About one hour after checkout, the manual was available for download. Clear reading and detailed. Thanks
;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
KS-FX901/KS-FX801
Cassette mechanism ass�y
<Removal of the cassette mechanism> Removing the head amplifier board. (See Fig.1 and 2)
1. For the 6pin wire extending from connector CN402 on the head amplifier board, disconnect it from the head relay board. 2. Disconnect the card wire from connector CN403 on the head amplifier board. 3. Remove the screw A attaching the head amplifier board. 4. Move the tab a as shown in Fig.2 and remove the head amplifier board while moving it in the direction of the arrow.
CN402 CN403 CN402 Head relay board
6pin wire
CN403 Head amplifier board
Fig.1
Removing the cassette assembly (See Fig.1 to 3)
mechanism
A
Head amplifier board
1. Disconnect the 6pin wire from connector CN402 and the card wire from CN403 on the head amplifier board (Refer to Fig.1 and 2). 2. Remove the four screws B cassette mechanism. on the bottom of the
Tab a
Fig.2
B
Cassette mechanism ass�y
Head amplifier board
B
Fig.3
1-6
|
|
|
> |
|
