I did not have the manual for a Whirl Pool gas dryer, therefore I purchased it from Owner-manuals. This is exactly what I needed. Thank you for the service.
I was so pleased to get the owner`s manuel within one hour! Thanks again.
Regards
Werner
Text excerpt from page 8 (click to view)
Installation
1. Remove the mounting screws attaching the foot pedal to the compactor. Remove foot pedal.
A
A
B
C
A B
C
A. Mounting screws B. Foot pedal
2. Remove mounting screws attaching the toe guard to the compactor. Remove toe guard. 3. Remove the mounting screws attaching the decorative panel to the compactor. Remove decorative panel and discard mounting screws. 4. Align the bottom of the custom panel with the bottom of the drawer front. 5. Secure the panel from the back using four #8 x 1" wood screws as shown. 6. Reinstall the toe guard using the existing screws and ¹��" washer. Then, reinstall the foot pedal.
D E F
A. Handle B. Custom panel C. Panel screw locations D. Toe guard E. Washer F. Toe guard screw
Custom Panel without Handle (for all C and S models) Dimensions
Use these dimension drawings to create a custom panel for use without a trim kit. The panel should be ¹��" (13 mm) min. thick.
