|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Straightforward ordering process. Service manual scan was clear & easy to read. Very comprehensive instructions for alignment. Excellent, thank you.
 ;
Fast, clear and useful. Important for me: the manual is in German.
;
Very good quality. Some parts are not fully readable, but the fundamental ones are fine.
;
very good quality readable manual,printed off very well.
;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
Programming the Remote Control
If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR combination unit) that you want to control with the TV�s remote control, use the following procedure to program the remote control.
Remote Control
1 2
Check the list of �Manufacturer�s Codes� on page 6 and find the three-digit code number for the manufacturer of your component. If more than one code number is listed, use the number listed first. Press
The
.
and FUNCTION button will flash when you press .
�
3
Press or FUNCTION button to indicate the type of component you want to program with the remote control.
You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3.
�
4 5 6
Use the Press
0
9
buttons to enter the three-digit manufacturer�s code number.
.
To check if the code number works, aim the TV�s remote control at the component and press on the green POWER button (VCR/DVD, SAT/CABLE, TV) that corresponds with that component. If it responds, you are done. If not try using another code listed for that manufacturer.
If you have problems programming your remote control, see �Troubleshooting� on page 42.
�
5
|
|
|
> |
|
